A built-in clock and calendar function enables timer based programming of inverter and charger operation. This permits you to set the system to work with time-of-day power rates or to limit a generator's run time to a specific time period of the day or week. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE and MATE2 include a RS232 port with DB9 jack for connection to the serial port of a PC computer. Through the use of optional WinVerter software you can perform such operations as data logging and graphical display of the system's operation and performance. The MATE system display and controller is surface mounted while the MATE2 is flush mountable in a wall cut-out.

 

MATE Specifications
Grey MATE	Surface mount with RS232
Black MATE_B	Surface mount with RS232
Black MATE2	Flush mount without RS232
Interface Display	3.1" (8 cm) backlit LCD - four line, 80 alpha numeric characters
Control Keypad	6 backlit silicone keys - dedicated inverter and AC input keys
Status Indicators	Two LED Status Indicators - AC input (yellow), inverting (green)
Communication Protocol	Proprietary OutBack Multi-drop using an OutBack HUB4 or HUB10
Interconnection Cabling	Standard CAT 5 network cable with RJ45 modular jack - 10' (3 m) included
PC Computer Interface	RS232 opto-isolated DB9 jack 9600 baud serial communication
Microprocessor	16 MHz low power consumption version
Setpoint and Data Memory	32K non-volatile flash RAM
Clock / Calendar	On-board real time clock with battery backup
Environmental Rating	Indoor Type 1
Maximum Cable Length	1000' (300 m)
Warranty	Standard 2 year / Optional 5 year
Shipping Weight	1 lb (.5 kg)
Shipping Dimensions (H x W x L)	5.75 x 4.25 x 2" (15 x 11 x 5 cm)