|
Nominal Battery Voltages |
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) |
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) |
|
Maximum Output Current |
80 amps @ 104° F (40°C) with adjustable current limit |
60 amps @ 104° F (40°C) with adjustable current limit |
|
Maximum Solar Array STC Nameplate |
12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC systems 6250 Watts |
12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts |
|
NEC Recommended Solar Array STC Nameplate |
12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts |
12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts |
|
PV Open Circuit Voltage (VOC) |
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum |
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum |
|
Standby Power Consumption |
Less than 1 Watt typical |
Less than 1 Watt typical |
|
Power Conversion Efficiency |
97.5% @ 80 Amps in a 48 VDC System - Typical |
98.1% @ 60 Amps in at 48 VDC System voltage - Typical |
|
Charging Regulation |
Five Stages: Bulk, Absorption, Float, Silent and Equalization |
Five Stages: Bulk, Absorption, Float, Silent and Equalization |
|
Voltage Regulation Set points |
10 to 80 VDC user adjustable with password protection |
10 to 60 VDC user adjustable with password protection |
|
Equalization Charging |
Programmable Voltage Setpoint and Duration - Automatic Termination when completed |
Programmable Voltage Setpoint and Duration - Automatic Termination when completed |
|
Battery Temperature Compensation |
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell |
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell |
|
Voltage Step-Down Capability |
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input |
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input |
|
Programmable Auxilary Control Output |
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC) |
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC) |
|
Status Display |
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total |
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total |
|
Remote Display and Controller |
Optional Mate or Mate2 with RS232 Serial Communications Port |
Optional Mate or Mate2 with RS232 Serial Communications Port |
|
Network Cabeling |
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires) |
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires) |
|
Data Logging |
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production |
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production |
|
Hydro Turbine Applications |
Consult factory for approved Turbines |
Consult factory for approved Turbines |
|
Positive Ground Applications |
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications) |
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications) |
|
Operating Temperature Range |
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C) |
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C) |
|
Environmental Rating |
Indoor Type 1 |
Indoor Type 1 |
|
Conduit Knockouts |
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom |
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom |
|
Warranty |
Standard 5 year / Available 10 Year |
Standard 5 year / Available 10 Year |
|
Weight - Unit |
12.20 lbs (5.56 kg) |
11.65 lbs (5.3 kg) |
|
- Shipping |
15.75 lbs (7.10 kg) |
14.55 lbs (6.4 kg) |
|
Dimensions - Unit |
16.25" x 5.75" x 4" (41.3 x 14 x 10 cm) -
(H x W x D) |
13.5 x 5.75 x 4" (40 x 14 x 10 cm) |
|
- Shipping |
21" x 10.5" x 9.75" (53 x 27 x 25 cm) |
18 x 11 x 8" (46 x 30 x 20 cm) |
|
Options |
Remote Temperature Sensor (RTS), HUB 4,
HUB 10, MATE, MATE 2 |
Remote Temperature Sensor (RTS), HUB 4,
HUB 10, MATE, MATE 2 |
|
Menu Languages |
English & Spanish |
English & Spanish |
Shopping Cart - 0 item(s)
